Auger Bucket for Materials



Load, carry and distribute materials with precision




- Unique on the market, the Auger Bucket for Materials measures the quantity discharged into the trench with precision, through an extension chute.

- Earth, sand, gravel (up to 2 inch in size)

- Fits to any machinery handler

  1. -Reliable and robust: bucket shell made of 5mm Hardox steel (GDL150) and 10mm S335 steel (GDL210)

  2. -Auger is driven by a hydraulic motor and oil bath gearbox

  3. -Hydraulic door is syncronized to the distribution (level indicator)

Contractor Equipment

AGROMEC Work Platform

  1. -Working areas: 4 ft x 12 ft OR 6 ft x 4 ft

- Empty weight: 2010 lbs

- Load capacity: 1600 lbs uniformly spread

- Hydraulic swivel: 38 degrees left and right


- Removable front guard

- Pilot operated lock valve and adjustable flow controls are standard

- Four 5000 lbs capacity safety line hooks ups at floor level for travel restraint

- 2 x 4 rear railing usable for fall arrest hook up (5000 lbs capacity)

- Quick-Attach receiver can be changed to fit different loaders


Agromec Work Platforms meet and exceed CSA standards for aerial working devices. This engineered platform meets all CSA safety standards and is welded according to CWB procedures.


Always check local regulations before using aerial working devices.

Sweepers

Sweeper Pro


- Width: 2.00 - 2.20 - 2.50m (78 - 86 - 100 inch).


Standard Equipment:

- 600 mm (24 inch) diameter brush

- Two - 300 mm (12 inch) diameter gauge wheels

- Left or Right manual orientation


Options:

- Collector bucket

- Side brush

  1. -Water system

  2. -Hydraulic orientation

  3. -Full floating system

  4. -Side shifter

Sweeper Bucket

- Width: 1.60 - 2.00 - 2.20 - 2.50 - 2.80 m    (63 - 78 - 86 - 100 - 112 inch)

- 600 mm (24 inch) diameter brush

- Four RESILEX non-marking wheels

- Hydraulic discharge collector box

- Works with one double acting spool


Options:

- Side brush

- Water system

Global Sweep

An economical sweeper for indoor and outdoor use!


This sweeper exclusively fits to pallet forks and is equipped with an integrated hydraulic motor in the main brush and a collector box with a mechanical release.


- Width: 1.30 - 1.60 m


Options:

- Side brush, adjustable, folding, orientable

- 100 L water tank

Sweeping Module

Fits to most buckets on the market in just 2 minutes!


- Width: 1.60 - 2.00 - 2.20 - 2.50 m (63 - 78 - 86 - 100 inch)


Standard Equipment:

- 600 mm (24 inch) diameter brush

- Weld on brackets for bucket

- Adjustable arms for brush positioning


Options:

- Galvanisation

- Floating (shaft mounted) forks for rough terrain use

- Heavy duty frame for safety and durability

  1. -Bale spears bushings installed on bottom tube (C-series)

  2. -Agromec uses only CASCADE pallet forks


Options:

- Bolted or welded back stop

- Higher capacity and/or longer forks available on special request

- Special design frames (extra wide, etc.) available on request

                    GMX Concrete Mixer Bucket


- Flow: 4 m3/hour with a 500 L bucket

  1. -For use with cement, concrete and mortar. It allows access to hard to reach areas

  2. -Mixing auger in Hardox steel, removable, 2 directions of rotation. Works with one double acting spool

  3. -Cover opening, mixing and discharge by electric valve

  4. -The auger is driven by a hydraulic motor. No maintenance is required!

  5. -Fits to any machinery handler


Mixing volumes: 200 L, 280 L, 350 L, 500 L or 700 L

Custom Made Forks

AGROMEC Hydraulic Fork Positioning

AGROMEC Pallet Fork Frames

AGROMEC Side Shift Pallet Fork

AGROMEC Leveling Fork